Stickers are used for decorations for the outside of the plane. I like how the stickers for the outside match colours with the piping on the plane. I found the sticker for the top of the door to be a little big; if you line up the orange on the bottom of the stickers with the orange on the plane the sticker overlaps a bit at the top. The stickers for the nose of the plane are not as difficult to apply as I thought they would be. They do seem a bit superfluous, though they do make the plane look nice. The plane is finished with the tail fin, that uses yet more stickers. It is interesting that this plane actually uses more stickers than the Friends plane does.
Stickers are used for decorations for the outside of the plane. I like how the stickers for the outside match colours with the piping on the plane. I found the sticker for the top of the door to be a little big; if you line up the orange on the bottom of the stickers with the orange on the plane the sticker overlaps a bit at the top. The stickers for the nose of the plane are not as difficult to apply as I thought they would be. They do seem a bit superfluous, though they do make the plane look nice. The plane is finished with the tail fin, that uses yet more stickers. It is interesting that this plane actually uses more stickers than the Friends plane does.
I purchased this set the day it was released for my LEGO City, as an upgrade from my previous airport (10159 Airport from 2004). First off, the build is great and although it's not very challenging, it's exciting to see the plane come to life and the use of the big plane pieces (eg. the nose, the wings, the tail etc.) was new to me, though I know there have been a number of planes in the past that use these pieces. There are 4 instruction booklets (2 for the plane, one for the airport, and one for the luggage/fuel/stairs car), 8 numbered bags, and two separate bags with the bigger pieces in. This makes the build very easy to follow. The completed set is very grand (especially the plane) in scale, and great looking. It's nice to see that a different colour scheme been used for the plane as opposed to the usual red and white or blue and white colours as seen in previous sets. The plane is HUGE, with a wingspan of around 2 32-wide baseplates (bare this in mind if you want to make a runway). However, despite its huge size, the inside of the plane is very bare. There are 5 seats for the passengers, another one facing backwards which I presume is for the cabin crew (although there isn't a cabin crew minifigure, which would have been a nice addition), and two seats in the cockpit. There's a tiny bathroom at the back of the plane, and a small galley area at the front with a sink and cupboard. There's easily room for a sixth chair in the plane, which I think should have been included, and the space within the plane could've been arranged better to fully optimise the area. The airport terminal has a very nice modern look, and includes the revolving door, tower, waiting area, security scanner and check in desk with luggage conveyor. Although this sounds like a lot of features, the inside of the terminal is, again, very bare and the space could've been used better. There are only 4 seats in the waiting area, and a lot of the space is taken up by the revolving door. The operational conveyor belt for the luggage is a nice touch, though, and there is a fair bit of playability within. The service car is a nice addition to this set and gives it more playability. All the trailers (fuel, stairs and luggage) connect together and attach to the service car, which has a really cool "follow me" sign on the back. This is a really nice addition to the set. Overall, I really like this set because of how it looks and because there's plenty of opportunity for play, but I think a lot more thought could've gone into maximising the space within the plane and the airport. Some more minifigures would have been good, such as a member of the cabin crew, a check-in clerk and a security officer. The value for money is okay with this set, as you do get a lot of big pieces, but the bare interiors are a little disappointing for the price you pay.

Frequently Asked Questions | About Brickset | Privacy and Cookies | Affiliate Marketing Disclosure | Site Map | Contact Us LEGO, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies. ©2018 The LEGO Group. Brickset, the Brickset logo and all content not covered by The LEGO Group's copyright is, unless otherwise stated, ©1997-2018 Brickset ltd.
While I like their characters, I really don’t like LEGO recycling their characters. I can make an exception for Bucky, who until this year has only been made available as a pretty exclusive (and pricey) polybag but having this exact same Captain America show up in so many sets is pretty damn lazy. If a super hero minifig has been used a year ago, it really isn’t too much to ask for LEGO to update it slightly.
Lego also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.[51]
Billund Airport had its beginning in 1961 when the son of the founder of the Lego Group, Godtfred Kirk Christiansen, established a private 800-meter long runway and hangar north of his factory in Billund. With Christiansen as a key driver, more of the neighbouring municipalities were included in the group of owners, and it was planned that the airport should be expanded to a regular public airport.
^ Jump up to: a b Alexander, Ruth (3 December 2012). "How tall can a Lego tower get?". BBC News. Archived from the original on 4 December 2012. Retrieved 4 December 2012. The average maximum force the bricks can stand is 4,240N. That's equivalent to a mass of 432 kg (950lbs). If you divide that by the mass of a single brick, which is 1.152g, then you get the grand total of bricks a single piece of Lego could support: 375,000. So, 375,000 bricks towering 3.5 kilometers (2.17 miles) high is what it would take to break a Lego brick.

Billund Airport (Danish: Billund Lufthavn) (IATA: BLL, ICAO: EKBI) is an airport in Denmark. Located 1 nautical mile (1.9 km; 1.2 mi) northeast[1] of Billund, it serves as one of the country's busiest air cargo centres, as well as a charter airline destination, although some regular airlines also offer flights there. Nearby Legoland Billund park is the largest tourist attraction in Denmark outside Copenhagen.


Primary concept and development work takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at these markets. The average development period for a new product is around twelve months, split into three stages. The first stage is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based upon the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and for testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation, for marketing and packaging.[33]


The design on the jet pilots’ outfits are very good, with a darker blue colour scheme offset with a red/white/yellow stripe pattern on the torso. The requisite wings and plane emblem complete the look, with the star-emblazoned helmet the icing on the cake. However, as good as those outfits are, I think the bi-plane pilots’ attire is even better, with a swish darker red colour on the legs and above the waist, culminating in a flame-effect design merging into a white torso. The old-fashioned flying helmets and goggles look great and really compliment the overall figure design.
As is the norm with LEGO sets these days, there are a fair few stickers in use for this item. I’m still not a fan of their use, but at this point in time, it is something I have come to expect and just get on with it now. In their defence, they do add to the overall presentation, making it that little bit harder to complain. As I said, this is my favourite of the three planes in the set, mainly because it looks superb and offers a great build experience. Seriously, I had so much fun building this. The instructions – as always – are clear, and it is not going to provide any major issues. Stability-wise, there are no concerns here, with the finished product very sturdy and, as proved by my daughter, can handle itself when being flown around the room by an excited seven-year-old. One minifigure can be seated at the controls, with suitable space for application and removal. The other pilot has its place on the top of the plane, with a single piece of black fencing to provide support for the death-defying pilot.

Compared to other major European hub airports, like Charles de Gaulle or Heathrow, CPH has a similar number of connections, but is much smaller in both actual size and passenger volumes, and can provide a calmer, more pleasant experience. Its location in the south of Scandinavia makes reaching most European destinations reasonable, and flying to destinations in the Baltic region and in Eastern Europe generally only takes half the time as from major hub airports in Western Europe.
@josekalel: I think the size of the terminal is kept in check for price reasons more than anything. This is a $100 set, and while bigger and pricier City sets exist, they tend to be few in number. What's more, the disadvantage to having a plane wide enough to seat two rows of passengers is that it inevitably takes up a big portion of the budget even for a larger set like this one. If the set were just the airport with no plane, then the terminal could probably be around twice this size at the very least… but then the set would not offer such a complete play experience.
Merlin Entertainments operates seven Legoland amusement parks, the original in Billund, Denmark, the second in Windsor, England, the third in Günzburg, Germany, the fourth in Carlsbad, California, the fifth in Winter Haven, Florida, the sixth in Nusajaya, Malaysia[66] and the seventh in Dubai, United Arab Emirates.[67] and the eighth in Shanghai, Peoples of Republic of China.[68] On 13 July 2005, the control of 70% of the Legoland parks was sold for $460 million to the Blackstone Group of New York while the remaining 30% is still held by Lego Group.[69] There are also eight Legoland Discovery Centres, two in Germany, four in the United States, one in Japan and one in the United Kingdom. Two Legoland Discovery Centres opened in 2013: one at the Westchester Ridge Hill shopping complex in Yonkers, NY and one at the Vaughan Mills in Vaughan, Ontario, Canada. Another has opened at the Meadowlands complex in East Rutherford, New Jersey in 2014.[70]
The differences between the two jets mainly come on the top and rear of the builds. One has a larger single rear fin and two larger wings at the back, while the other has two smaller fins and the large wings positioned in the middle of the vehicle. The nose and cockpit areas are identical on both jets, and both come with stickers; the airshow logo on the wings, and a plane motif on the sides.
I agree to Target collecting my personal information to improve Target's retail offering, conduct product and market research, and analyse my purchasing and online activity. This includes receiving marketing communications and targeted advertising subject to me exercising my privacy rights and choices. Target may provide my personal information to service providers (some of whom may be located outside Australia) to assist with services like data processing, data analysis, printing, contact centre services, business consulting, auditing, archival, delivery and mailing services.
The first few bags build the small truck with carts that you see on airport runways. The truck has a "follow me" sign that I confess I have not seen at any airport. There is also a fueling tank and a rolling staircase that sits next to the plane to allow for boarding. Both the tank and the staircase are additional carts for the truck, though I am guessing not both at the same time.
Correct me if I'm wrong, but is the hangar only large enough to house the biplane? A bit of a cock-up if that's the case. As good as the planes are, the hangar is a major failing. It looks like it's only about 30-40 pieces; just a bunch of big plates, some prefab cross-bracing and ... errrm ... air. Not so much a "hangar" as an aviation-equivalent of a car port!
Billund Airport had its beginning in 1961 when the son of the founder of the Lego Group, Godtfred Kirk Christiansen, established a private 800-meter long runway and hangar north of his factory in Billund. With Christiansen as a key driver, more of the neighbouring municipalities were included in the group of owners, and it was planned that the airport should be expanded to a regular public airport.

The latest wave of City sets takes us to the airport, for a wide selection of aerial adventures. Whether it’s delivering the mail, or making sure a VIP gets to where they need to go, the LEGO City Airport range has a wide selection available. With five sets of varying prices, there truly is something for everyone here. The Airport Air Show – which we are looking at today – offers two stunt jets and a vintage plane – as well as a hangar and the staff required to keep things ticking over.

A minifigure can comfortably fit seated inside the cockpit, and it is here that I found the first issue with the set. I had no issue inserting and removing the figure from his seated position, but my seven-year old struggled to get him out, deciding to leave him onboard instead of disembarking after she brought the jet back into the hangar. The physical connection between LEGO pieces in the cockpit and the pilot minifigure didn’t seem to present an issue, so whether or not this was just a one-off issue remains to be seen.
Since 1963, Lego pieces have been manufactured from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS).[12][30] As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds at pressures between 25 and 150 tonnes, and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres, to ensure the bricks remain connected.[33] Human inspectors check the output of the moulds, to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required.[37] Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it.[38][39] Lego has a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic it currently uses in its bricks.[40]
City has had many games since it was released. One in particular, The Robot Chronicles, was a cross-over game which saw the City, Racers, and Agents 2.0 all together in Lego City, where the player controlled and unlocked vehicles in each theme to play through a campaign. This campaign/game was also tied into a My LEGO Network The Robot Chronicles campaign- playing the game earned rewards in MLN which could be used in that campaign to eventually get the Key to LEGO City.
City is the thematic title under which most Town-related System sets were released from 2005 and onward. There are numerous sets that are associated with Construction, Police, Fire, Emergency, Train, Airport, Transportation, Cargo, Traffic, Coast Guard, Farm, Great Vehicles, Mining, and Space. European catalogs featured another theme called City in the years 1999 to 2000, which was referred to as City Center in American catalogs.
Structurally, the plane model is sound and very well-built. A little too well-built in some areas you would say, but they are necessary measures like the awkward humps in the interior of the plane you will discover. Space is very wisely used in this model as they’ve managed to fit a proper looking cockpit for 2 pilots and even managed to squeeze in a sink, a mini-bar with the one drink, seats for 6 more passengers and even a tight little space of a washroom. That door hinge though, is a work of art.
The mechanic is a rather basic design, with an all-blue colour and a work shirt pattern. He comes equipped with a walkie-talkie and a full tool truck, containing every piece of equipment a mechanic could need. The airport worker looks like every other workman from The LEGO Movie that joined Emmet in a chorus of Everything is Awesome, and is a nostalgic hark bark to the old construction figures that I grew up playing with.
This was bought for my son's 5th birthday. If your kid likes to really play with the sets like mine does (not just bought for building it) be aware that the door of the airplane likes to pop off if it is not opened/closed just the right way with gentle hands. My son is a typical rambunctious boy and is not great at opening/closing things gingerly, so the door presents a bit of a problem for him. He doesn't have the dexterity or patience to snap the two tiny joint pieces onto the little pole just so yet, so whenever the door comes off he gets frustrated and needs help. Which is fine, we help him and he will eventually learn to do it himself, but just wanted to make y'all aware of this in case you have someone who is picky about the door opening and closing easily/correctly :) I know some little ones get fussy about these things!
The capabilities of the Mindstorms range have now been harnessed for use in Iko Creative Prosthetic System, a prosthetic limbs system designed for children. Designs for these Lego prosthetics allow everything from mechanical diggers to laser-firing spaceships to be screwed on to the end of a child's limb. Iko is the work of the Chicago-based Colombian designer Carlos Arturo Torres, and is a modular system that allows children to customise their own prosthetics with the ease of clicking together plastic bricks. Designed with Lego's Future Lab, the Danish toy company's experimental research department, and Cirec, a Colombian foundation for physical rehabilitation, the modular prosthetic incorporates myoelectric sensors that register the activity of the muscle in the stump and send a signal to control movement in the attachment. A processing unit in the body of the prosthetic contains an engine compatible with Lego Mindstorms, the company's robotics line, which lets the wearer build an extensive range of customised, programmable limbs.[54][55]
Will agree with some other reviewers that some parts will fall off with normal-rough play. However, the attention to detail is pretty cool and almost makes up for it. The top is hard to take off and put on to move the minifigs. There is a TSA checkpoint, a conveyor belt for luggage, a rather impressive runway vehicle. Couple this with the cargo plane or another airplane set and some atraight road nameplates, you got an airport without spending a fortune.
Merlin Entertainments operates seven Legoland amusement parks, the original in Billund, Denmark, the second in Windsor, England, the third in Günzburg, Germany, the fourth in Carlsbad, California, the fifth in Winter Haven, Florida, the sixth in Nusajaya, Malaysia[66] and the seventh in Dubai, United Arab Emirates.[67] and the eighth in Shanghai, Peoples of Republic of China.[68] On 13 July 2005, the control of 70% of the Legoland parks was sold for $460 million to the Blackstone Group of New York while the remaining 30% is still held by Lego Group.[69] There are also eight Legoland Discovery Centres, two in Germany, four in the United States, one in Japan and one in the United Kingdom. Two Legoland Discovery Centres opened in 2013: one at the Westchester Ridge Hill shopping complex in Yonkers, NY and one at the Vaughan Mills in Vaughan, Ontario, Canada. Another has opened at the Meadowlands complex in East Rutherford, New Jersey in 2014.[70]
Frequently Asked Questions | About Brickset | Privacy and Cookies | Affiliate Marketing Disclosure | Site Map | Contact Us LEGO, the LEGO logo, the Minifigure, and the Brick and Knob configurations are trademarks of the LEGO Group of Companies. ©2018 The LEGO Group. Brickset, the Brickset logo and all content not covered by The LEGO Group's copyright is, unless otherwise stated, ©1997-2018 Brickset ltd.
×