Since 1963, Lego pieces have been manufactured from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds at pressures between 25 and 150 tonnes, and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres, to ensure the bricks remain connected. Human inspectors check the output of the moulds, to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required. Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego has a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic it currently uses in its bricks.
LEGO CITY has some recurring themes that can get old after a while and obviously are meant for younger LEGO fans. The Fire and Police themes within CITY quickly come to mind as it seems like they have a new run each year. The Airport theme is one of those that doesn't quite occur every year. The last airport set was released in 2010 and was set #3182. This year (2016) another airport was released. #60104, Airport Passenger Terminal, was released on 1 August 2016 in the US. It costs $99.99 in the US and contains 694 pieces or $0.144 per piece. I picked the set up from Amazon at 20% off or $80 ($0.115 per piece). Yay sales! Onto the review...
Colour-wise, it is mainly yellow, with only a dash of green and red, and a little more white, there to break it up. The worker has space to stand and drive the vehicle, and has a walkie talkie attached on the side of the car. Around the other side is a coiled-up, what I assume is a, fuel pump. It looks pretty good when coiled up on the side of the car. Stickers come into use again here, this time for the number plates.
LIC - LEGO Instruction Creator, developed by Jeremy Czajkowski, is a cross-platform, Python, OpenGL & Qt powered desktop application for creating and editing LEGO instruction books. LIC imports 3D models, organizes them into submodels, pages & steps, and exports the end result as images or PDF. A rich, WYSIWYG UI editor, which provides a fully interactive preview window along side a drag & drop-enabled navigation tree, to help organize and layout your book. Portions of LIC are based on work of Remi Gagne. LIC will be part of the AIOI - LDraw All-In-One-Installer.
Billund Airport had its beginning in 1961 when the son of the founder of the Lego Group, Godtfred Kirk Christiansen, established a private 800-meter long runway and hangar north of his factory in Billund. With Christiansen as a key driver, more of the neighbouring municipalities were included in the group of owners, and it was planned that the airport should be expanded to a regular public airport.
The design on the jet pilots’ outfits are very good, with a darker blue colour scheme offset with a red/white/yellow stripe pattern on the torso. The requisite wings and plane emblem complete the look, with the star-emblazoned helmet the icing on the cake. However, as good as those outfits are, I think the bi-plane pilots’ attire is even better, with a swish darker red colour on the legs and above the waist, culminating in a flame-effect design merging into a white torso. The old-fashioned flying helmets and goggles look great and really compliment the overall figure design.
In contrast to the first jet with its delta wing configuration and forward canard wings, the second jet features a more conventional straight wing configuration with tapered leading and trailing edges. As you might expect, construction of the fuselage of the second jet is in many ways similar to that of the first, although in order to accommodate twin exhausts the rear isn’t tapered, and the air intakes which flank the fuselage are of a different design.
Inside the box we find eight numbered bags, two unnumbered bags containing large molded plane parts, two loose 16x16 plates, the large airplane wing in medium grey, a sticker sheet and four instruction booklets of varying sizes. Unfortunately there is no cardboard to keep the booklets and sticker sheet flat (though fortunately mine were not crumpled), but never fear, there is a brick separator!
My Lego Network is a social networking site that involves items, blueprints, ranks, badges which are earned for completing certain tasks, trading and trophies called masterpieces which allow users to progress to go to the next rank. The website has a built in inbox which allows users to send pre written messages to one another. The Lego Network includes automated non-player characters within called "Networkers", who are able to do things which normal users cannot do, sending custom messages, and selling masterpieces and blueprints. The site also has modules which are set up on the user's page that give the user items, or that display picture compositions. Before My Lego Network, there were Lego Club Pages, which essentially held the same purpose, although the design lacked complex interaction.
The mechanic is a rather basic design, with an all-blue colour and a work shirt pattern. He comes equipped with a walkie-talkie and a full tool truck, containing every piece of equipment a mechanic could need. The airport worker looks like every other workman from The LEGO Movie that joined Emmet in a chorus of Everything is Awesome, and is a nostalgic hark bark to the old construction figures that I grew up playing with.
Thanks for the great review and comparison. I've thought about getting the Friends Airport for my daughter, as we both like the amount of detail inside the plane. Why would Lego think that boys don't care as much about detail? I love the wider body planes, but it's a shame they're not producing the runway plates, or including them in the airport sets, anymore. I agree with ZeeBricks that if they're not going to include everything an airport needs (although as expensive as price/piece these sets are getting it would cost a fortune) they should sell smaller sets that can be added together. Now that I'm feeling nostalgic for classic airport I might rebuild my 6392 and dust off my 6396 and set them up tonight, it's time for some serious swooshing :)
The cockpit, including the stickers on the sides and the canopy, is identical to that of the first jet, as is the front of the aircraft. As previously noted, however, the wing configuration is different, as is the tail design which features twin tail fins and a pair of fuselage-mounted tailplanes. The red 4 x 1 x 3 tail fins, which have appeared in a total of seven sets including this one, are angled outwards similar to the arrangement on an F/A-18 Hornet. Overall, it’s another sleek design but once again the smooth lines are somewhat spoiled by the prominent canopy.
This was bought for my son's 5th birthday. If your kid likes to really play with the sets like mine does (not just bought for building it) be aware that the door of the airplane likes to pop off if it is not opened/closed just the right way with gentle hands. My son is a typical rambunctious boy and is not great at opening/closing things gingerly, so the door presents a bit of a problem for him. He doesn't have the dexterity or patience to snap the two tiny joint pieces onto the little pole just so yet, so whenever the door comes off he gets frustrated and needs help. Which is fine, we help him and he will eventually learn to do it himself, but just wanted to make y'all aware of this in case you have someone who is picky about the door opening and closing easily/correctly :) I know some little ones get fussy about these things!
The construction of the new airport was carried out during 1964 and the airport opened on 1 November, with one runway at 1660 meters in length and 45 meters width, a small platform where aircraft could be served, and a control tower to the controller. Hans Erik Christensen, the former chief pilot at LEGO became director, and the passengers were handled in LEGO's hangar until the first terminal building was opened in the spring of 1966. The airport was continuously expanded the following years, with new facilities, terminal buildings, lounge, tax-free area and hangars where LC Johansen's studio often participated as an architect (today called the Johannsen Architects), while other work was carried out by the airport's own studio.
The last of the three aircraft is a modern biplane. This incorporates a number of rare orange elements including right and left 8 x 3 wedge plates which make up the wings and have only previously appeared in three sets, a 3 x 4 wedge brick only previously found in two sets, and a 3 x 6 round half plate with a 1 x 2 cutout which has only previous appeared in a single set in this colour and which forms the tailplanes. Similar to the two jets the tail fin is stickered rather than printed, as are the pair of 1 x 4 x 1 panels making up the sides of the cockpit. Unlike the jets, however, the instrument panel is stickered, which seems odd as there are existing printed 1 x 2 light bluish grey tiles which could have done an acceptable job. There are also a pair of stickers which represent the engine exhausts and which are applied to a couple of modified 2 x 4 x 1 1/3 bricks with curved top which sit just behind the propeller; applying these neatly to the curved surface takes a steady hand, and that’s also the case for the pair of checkerboard stickers which are stuck onto the propeller cowl. As if stickered exhausts weren’t enough, there are also a couple of light bluish grey exhaust pipes with Technic pin which emerge from the propeller cowl and run along either side of the fuselage. They’re entirely superfluous given the presence of the stickered exhausts but they still look cool regardless!
My six year old grandson loves Lego's. His daddy is a pilot so we got him this Lego City Airport for his birthday. Wow! He couldn't wait to put it together! It was organized in bags (which I didn't know) and this prevents overwhelming a little person. At least that's what my son said! He did indeed help our grandson put it together, but that was expected as a father/son project. It is so realistic! I love the tower especially. It has moving parts and all kinds of nifty little things - like luggage! The plane has a bathroom too! This is a great addition to anyone who loves Lego's!
With a price tag of £69.99/$79.99 and a piece count of 807 it means you’re paying roughly 8-9p/9-10cents per piece, which isn’t too bad when you look at it that way. This set is also quite unique in that it contains the spoilerific Giant Man brick built figure. Also in the set is the airport control tower, a baggage car and a smaller version of the Quinjet.
Since around 2000, the Lego Group has been promoting "Lego Serious Play", a form of business consultancy fostering creative thinking, in which team members build metaphors of their organizational identities and experiences using Lego bricks. Participants work through imaginary scenarios using visual three-dimensional Lego constructions, imaginatively exploring possibilities in a serious form of play.