The intelligent brick can be programmed using official software available for Windows and Mac computers, and is downloaded onto the brick via Bluetooth or a USB cable. There are also several unofficial programs and compatible programming languages that have been made to work with the brick, and many books have been written to support this community.
Last to be assembled is the hangar, which given its size is a surprisingly quick build – even though I’m a notoriously slow builder it took me barely ten minutes to put it together. The first step involves stacking dark bluish grey and orange plates and tiles to create a three-sided enclosure covering an area of 24 x 32 studs. Two side walls are then constructed from 1 x 6 x 5 rectangular girders topped off with dark bluish grey bricks and orange tiles, after which the roof is assembled, predominantly from a few large plates including a black 8 x 16 plate only previously available in two sets, and four dark bluish grey 6 x 24 plates which are only appearing in a set for the second time ever. A couple of stickers at the front of the structure identify it as an Airshow Hanger; to be frank, describing it as a hanger is probably exaggerating the case a bit as with its open front and rear it’s more akin to a large shelter.
The main constituents of the set are a tanker truck, three aircraft and a hangar. Each of these gets its own instruction booklet and bags of elements. First up is the tanker truck (below) which at only four studs wide and less than ten studs in length reminds me of the 4-stud wide vehicles of my youth. This impression is reinforced by the inclusion of a couple of late 70’s-style 2 x 4 mudguards in the build.
It’s always tough to sum up a set that has the sort of price tag that this one carries; because it doesn’t necessarily offer the collectors value that a Marvel or Star Wars set will offer, it can be a little harder to justify an outlay on, in this case, a few planes and a aircraft hangar. However, if you have a love for the City range, whether it be a nostalgic look back at your childhood, the general consistently-superior design of the range, or simply because your kids want an airport to build, this one has to be recommended. Once I finished building this, I set it up in my daughter’s bedroom, and the overjoyed expression on her face, followed by the extended time taken to play with the planes and flying them all over her room, made every single minute of the build worthwhile. Watching her swirl around her room – and later, the rest of house – clutching the planes and bringing them in for landings into the hangar, reminded me of why I fell in love with LEGO in the the first place; imagination.
Billund Airport had its beginning in 1961 when the son of the founder of the Lego Group, Godtfred Kirk Christiansen, established a private 800-meter long runway and hangar north of his factory in Billund. With Christiansen as a key driver, more of the neighbouring municipalities were included in the group of owners, and it was planned that the airport should be expanded to a regular public airport.
Since 1963, Lego pieces have been manufactured from a strong, resilient plastic known as acrylonitrile butadiene styrene (ABS). As of September 2008, Lego engineers use the NX CAD/CAM/CAE PLM software suite to model the elements. The software allows the parts to be optimised by way of mould flow and stress analysis. Prototype moulds are sometimes built before the design is committed to mass production. The ABS plastic is heated to 232 °C (450 °F) until it reaches a dough-like consistency. It is then injected into the moulds at pressures between 25 and 150 tonnes, and takes approximately 15 seconds to cool. The moulds are permitted a tolerance of up to twenty micrometres, to ensure the bricks remain connected. Human inspectors check the output of the moulds, to eliminate significant variations in colour or thickness. According to the Lego Group, about eighteen bricks out of every million fail to meet the standard required. Lego factories recycle all but about 1 percent of their plastic waste from the manufacturing process. If the plastic cannot be re-used in Lego bricks, it is processed and sold on to industries that can make use of it. Lego has a self-imposed 2030 deadline to find a more eco-friendly alternative to the ABS plastic it currently uses in its bricks.
The definitive shape of the Lego bricks, with the inner tubes, was patented by the Lego Group in 1958. Several competitors have attempted to take advantage of Lego's popularity by producing blocks of similar dimensions, and advertising them as being compatible with Lego bricks. In 2002, Lego sued the CoCo Toy Company in Beijing for copyright infringement over its "Coko bricks" product. CoCo was ordered to cease manufacture of the products, publish a formal apology and pay damages. Lego sued the English company Best-Lock Construction Toys in German courts in 2004 and 2009; the Federal Patent Court of Germany denied Lego trademark protection for the shape of its bricks for the latter case. In 2005, the Lego Company sued Canadian company Mega Bloks for trademark violation, but the Supreme Court of Canada upheld Mega Bloks' rights to sell their product. In 2010, the European Court of Justice ruled that the eight-peg design of the original Lego brick "merely performs a technical function [and] cannot be registered as a trademark."
LDStructure, developed by Michael Heidemann, is a tool for analyzing ldraw parts library. With LDStructure you will get a tool that tells you which parts are required to show the current part and where the current part is used in. You will get this information within a second or even quicker. So this tool is a "needs to have" if you are working on parts for the ldraw part library.
Yes, the famous franchises will remain the selling point for many a LEGO fan, but for those who spent years of their childhood sitting in their lounges or bedrooms building hospitals – nay, worlds – LEGO City is everything that you could need. And for a set such as this to bring back your childhood, as well as give you a thoroughly enjoyable build experience – and the added bonus of seeing a new generation of excited faces – this is a must-have set and worth every penny.
Basically, the only thing that the two sets have in common is that they both have planes. However there is quite a bit of difference on the inside of the planes. There are a lot more details in the Friends plane. In addition to the seats, there is a rolling service cart complete with refreshments, emergency lighting as well as a larger galley and lav in the back of the plane.
This set has essentially all that's needed for airplane-related play: the plane, an airport terminal, and a service vehicle. And each part of the set is quite detailed. The plane feature a galley and a toilet; the service vehicle has stairs, a baggage trailer, etc; and the terminal has revolving doors, security check, and a baggage conveyor belt. The building process is also well planned out and documented. The child is eased into building by starting out with the service vehicle, then comes the plane, and last the terminal, which can be challenging.
The main wings are made up of a pair of white 10 x 10 wedge plates with cut corner and no studs in the centre; these are rare, having only previously appeared in two sets in this colour. The red 1 x 1 plate with tooth on each wing tip is also uncommon, having appeared in less than ten sets to date. The sides of the cockpit are made up of stickered red 1 x 4 x 1 panels, and it definitely helps if you concentrate when you apply the stickers, which I clearly didn’t as you can see in the picture below…. The area behind the cockpit canopy is nicely contoured by a red 4 x 4 triple wedge which, I was surprised to discover, has only previously appeared in a single set in this colour. Not to be outdone, however, the large 12 x 2 x 5 tail is appearing for the very first time in red. The hinged trans-black cockpit canopy is yet another rare element, appearing here for only the second time ever; rare it might be, but its pronounced curvature unfortunately means that it somewhat spoils the hitherto sleek lines of the jet. The flipside of this, however, is that the cockpit can comfortably accommodate the pilot.
City is the thematic title under which most Town-related System sets were released from 2005 and onward. There are numerous sets that are associated with Construction, Police, Fire, Emergency, Train, Airport, Transportation, Cargo, Traffic, Coast Guard, Farm, Great Vehicles, Mining, and Space. European catalogs featured another theme called City in the years 1999 to 2000, which was referred to as City Center in American catalogs.
After World City's discontinuation in 2004, it was replaced with City as System's primary town-life related theme in 2005. However, unlike its predecessor, it was not limited to sets involving rescue services like Police, Fire or Coast Guard, but also introduced the first new construction site related sets since the discontinuation of City Center in 2000. In 2006, the first new airport set that included the first jetway since 6597 Century Skyway (1994) was released, as well as the first new hospital since 6380 Emergency Treatment Center from 1987. These releases expanded City to a scope only comparable to the original Town theme, and in 2009 it even went slightly beyond that, by introducing the first farm-related System sets. Also, in that year, City followed this route to release more truly civilian town life sets such as 7641 City Corner and 7639 Camper. In 2010 City released more civilian sets including 8403 Family House and 8404 Public Transport. In 2011 City re-introduced the Space sub-theme along with some new Harbour sets. In the first wave of 2012, City had forest police and fire sets as well as some more commercial/civilian sets. The second wave of 2012 featured the introduction of the Mining theme and respective sets, as well as a hospital. In the winter of 2013, Police and Fire sets were once again focused on but, contrary to those released in the previous year, were set in the city. In the summer of 2013, the Coast Guard and Cargo subthemes were brought back.
The differences between the two jets mainly come on the top and rear of the builds. One has a larger single rear fin and two larger wings at the back, while the other has two smaller fins and the large wings positioned in the middle of the vehicle. The nose and cockpit areas are identical on both jets, and both come with stickers; the airshow logo on the wings, and a plane motif on the sides.
The cockpit, including the stickers on the sides and the canopy, is identical to that of the first jet, as is the front of the aircraft. As previously noted, however, the wing configuration is different, as is the tail design which features twin tail fins and a pair of fuselage-mounted tailplanes. The red 4 x 1 x 3 tail fins, which have appeared in a total of seven sets including this one, are angled outwards similar to the arrangement on an F/A-18 Hornet. Overall, it’s another sleek design but once again the smooth lines are somewhat spoiled by the prominent canopy.
There are 3 cardboard boxes with more Easter eggs. We get a few references to Marvel organisations such as A.I.M., who you may remember from Iron Man 3 as an R&D agency run by Aldrich Killian, Hammer, one of Stark Industries primary rivals which made an appearance in Iron Man 2, bankrolling Whiplash and finally a box with the Stark Industries logo on it.