Structurally, the plane model is sound and very well-built. A little too well-built in some areas you would say, but they are necessary measures like the awkward humps in the interior of the plane you will discover. Space is very wisely used in this model as they’ve managed to fit a proper looking cockpit for 2 pilots and even managed to squeeze in a sink, a mini-bar with the one drink, seats for 6 more passengers and even a tight little space of a washroom. That door hinge though, is a work of art.
The set contains six minifigures. Even though they all incorporate standard, unprinted minifigure legs together with commonly-available headprints, it appears that all six are unique to the set. First up are two members of the Ground Crew (below). The bearded guy has an orange torso printed with a hi-viz jacket, ID badge and red pen pattern. This has appeared in nine sets to date including all of the 2016 Airport sets plus 60080 Spaceport which I reviewed here last summer. His red construction helmet, which incorporates a pair of non-removable black ear muffs, has appeared in less than ten sets to date. The other member of the ground crew has a rather nice printed medium blue torso which is new this year and has only appeared in a total of three sets including this one. It features a shirt print which includes the Octan logo and a top pocket complete with a pen.

In 2008, the entire runway was renovated and paved, and a new taxiway was built, nicknamed "Mike". This major task only took 14 hours. The runway was closed over night between the hours 23:00 and 06:00. This did not prevent a Boeing 737-800 from Ryanair landing at one end of the runway, while they worked at the other end. The same year was also a record year for the airport. 2,546,856 passengers passed through the terminals, an increase of 12.7 percent compared with 2007.
Attention then shifts to construction of the three aircraft. When I first spied this set I assumed that the two red jets were the same, but closer examination reveals a number of differences. First up is a red jet with a canard wing configuration as seen in the Saab Viggen amongst others. The lower fuselage is fashioned from a number of double and triple inverted 45 degree slopes with a pair of 1 x 14 Technic bricks running through the centre; there’s no obvious reason for Technic bricks to be used in this situation – standard 1 x 14 bricks would have done the job just as well - so I assume that LEGO just happened to have a bunch of them lying around…. A printed black 1 x 2 tile in the cockpit represents the instrument panel, while a substantial air intake is attached on either side of the fuselage at a 90 degree angle by way of brackets.
Correct me if I'm wrong, but is the hangar only large enough to house the biplane? A bit of a cock-up if that's the case. As good as the planes are, the hangar is a major failing. It looks like it's only about 30-40 pieces; just a bunch of big plates, some prefab cross-bracing and ... errrm ... air. Not so much a "hangar" as an aviation-equivalent of a car port!
The railway station, 1 Københavns Lufthavn, Kastrup Station (sometimes called CPH Airport Station and wrongly Kastrup Station), is located in Terminal 3. The station has frequent connections to Copenhagen and Malmö, as well as InterCity trains for the rest of Denmark and a few daily SJ 2000 express trains for Stockholm. The frequent Øresund trains between Copenhagen and Malmö continue in Denmark to Elsinore and in Sweden to a number of destinations in Scania and other parts of Götaland. The travel time to Copenhagen Central Station is 12 minutes, and 20 minutes to Malmö Central Station.
I purchased this set the day it was released for my LEGO City, as an upgrade from my previous airport (10159 Airport from 2004). First off, the build is great and although it's not very challenging, it's exciting to see the plane come to life and the use of the big plane pieces (eg. the nose, the wings, the tail etc.) was new to me, though I know there have been a number of planes in the past that use these pieces. There are 4 instruction booklets (2 for the plane, one for the airport, and one for the luggage/fuel/stairs car), 8 numbered bags, and two separate bags with the bigger pieces in. This makes the build very easy to follow. The completed set is very grand (especially the plane) in scale, and great looking. It's nice to see that a different colour scheme been used for the plane as opposed to the usual red and white or blue and white colours as seen in previous sets. The plane is HUGE, with a wingspan of around 2 32-wide baseplates (bare this in mind if you want to make a runway). However, despite its huge size, the inside of the plane is very bare. There are 5 seats for the passengers, another one facing backwards which I presume is for the cabin crew (although there isn't a cabin crew minifigure, which would have been a nice addition), and two seats in the cockpit. There's a tiny bathroom at the back of the plane, and a small galley area at the front with a sink and cupboard. There's easily room for a sixth chair in the plane, which I think should have been included, and the space within the plane could've been arranged better to fully optimise the area. The airport terminal has a very nice modern look, and includes the revolving door, tower, waiting area, security scanner and check in desk with luggage conveyor. Although this sounds like a lot of features, the inside of the terminal is, again, very bare and the space could've been used better. There are only 4 seats in the waiting area, and a lot of the space is taken up by the revolving door. The operational conveyor belt for the luggage is a nice touch, though, and there is a fair bit of playability within. The service car is a nice addition to this set and gives it more playability. All the trailers (fuel, stairs and luggage) connect together and attach to the service car, which has a really cool "follow me" sign on the back. This is a really nice addition to the set. Overall, I really like this set because of how it looks and because there's plenty of opportunity for play, but I think a lot more thought could've gone into maximising the space within the plane and the airport. Some more minifigures would have been good, such as a member of the cabin crew, a check-in clerk and a security officer. The value for money is okay with this set, as you do get a lot of big pieces, but the bare interiors are a little disappointing for the price you pay.
This set has essentially all that's needed for airplane-related play: the plane, an airport terminal, and a service vehicle. And each part of the set is quite detailed. The plane feature a galley and a toilet; the service vehicle has stairs, a baggage trailer, etc; and the terminal has revolving doors, security check, and a baggage conveyor belt. The building process is also well planned out and documented. The child is eased into building by starting out with the service vehicle, then comes the plane, and last the terminal, which can be challenging.
If you’ve watched Captain America: Civil War, you’d know that the airport is the scene of one of the coolest superhero showdowns ever, with Team Iron Man and Team Captain America duking it out on the tarmac. The scene is chaotic, gorgeously choreographed and most importantly stolen by the likes of Spider-Man (not included in this set) and Ant-Man transforming into the aptly named Giant-Man.
Even in terms of play value it mostly seems to be a trade-off — 60104 loses the vending machine, cafe, baggage x-ray scanner, and a few seats on the plane but gains a baggage conveyor, a restroom, a refueling tank for the plane, an additional minifigure, and more seats in the waiting area. It's pretty nice to see the value of a LEGO air terminal remain fairly stable even though the price has not increased.
In June 2013, it was reported that Warner Bros. was developing a feature film adaptation of Lego Ninjago. Brothers Dan Hageman and Kevin Hageman were attached to write the adaptation, while Dan Lin and Roy Lee, along with Phil Lord and Chris Miller, were announced as producers.[87] The film, The Lego Ninjago Movie, was released in September 2017.[88] A computer-generated animated series based on Lego Ninjago: Masters of Spinjitzu began in 2011, and another based on Legends of Chima began in 2013. A television series of Lego City has also been announced.[89]
I'm not sure what to make of the set yet. I like the planes (although that biplane really doesn't need the bubble canopy). The idea of adding a hangar is interesting and I don't mind that it's a bit open. But the fact that it'll only house one of the three planes is annoying. Having said that, I'm not sure what you could do about it. Tripling the hangar would make it big and boring and push the price up. Could they have done two planes and a double hangar?
Last to be assembled is the hangar, which given its size is a surprisingly quick build – even though I’m a notoriously slow builder it took me barely ten minutes to put it together. The first step involves stacking dark bluish grey and orange plates and tiles to create a three-sided enclosure covering an area of 24 x 32 studs. Two side walls are then constructed from 1 x 6 x 5 rectangular girders topped off with dark bluish grey bricks and orange tiles, after which the roof is assembled, predominantly from a few large plates including a black 8 x 16 plate only previously available in two sets, and four dark bluish grey 6 x 24 plates which are only appearing in a set for the second time ever. A couple of stickers at the front of the structure identify it as an Airshow Hanger; to be frank, describing it as a hanger is probably exaggerating the case a bit as with its open front and rear it’s more akin to a large shelter.
Basically, the only thing that the two sets have in common is that they both have planes. However there is quite a bit of difference on the inside of the planes. There are a lot more details in the Friends plane. In addition to the seats, there is a rolling service cart complete with refreshments, emergency lighting as well as a larger galley and lav in the back of the plane.

In contrast to the first jet with its delta wing configuration and forward canard wings, the second jet features a more conventional straight wing configuration with tapered leading and trailing edges. As you might expect, construction of the fuselage of the second jet is in many ways similar to that of the first, although in order to accommodate twin exhausts the rear isn’t tapered, and the air intakes which flank the fuselage are of a different design.

LIC - LEGO Instruction Creator, developed by Jeremy Czajkowski, is a cross-platform, Python, OpenGL & Qt powered desktop application for creating and editing LEGO instruction books. LIC imports 3D models, organizes them into submodels, pages & steps, and exports the end result as images or PDF. A rich, WYSIWYG UI editor, which provides a fully interactive preview window along side a drag & drop-enabled navigation tree, to help organize and layout your book. Portions of LIC are based on work of Remi Gagne. LIC will be part of the AIOI - LDraw All-In-One-Installer.
Colour-wise, it is mainly yellow, with only a dash of green and red, and a little more white, there to break it up. The worker has space to stand and drive the vehicle, and has a walkie talkie attached on the side of the car. Around the other side is a coiled-up, what I assume is a, fuel pump. It looks pretty good when coiled up on the side of the car. Stickers come into use again here, this time for the number plates.