Parking capacity at Copenhagen Airport was greatly expanded in 2015 with the construction of a new lot as one of the first phases in an ambitious airport expansion plan scheduled to roll out in the coming decades. There are several lots: those near the terminals are very expensive, while the further-flung ones are cheaper (but have free shuttle bus service to the terminals).
The remainder of the build is the control tower and terminal building. First there is a metal detector screener leading to the waiting/secure area of the airport, which seems taller than it needs to be for the minifigures. I think the same effect could have been made with half the height, except that would not allow for an impressive height for the overall tower. However it does seem to be similar to many modern airports with the high ceilings. This area also seems to be someplace to check luggage as evidenced by the rather nifty conveyor belt that comes in a full part. The moving parts of the set include a revolving door (a very tall one, for the first floor) that leads from the secure area of the airport out to the tarmac, and of course the conveyor belt.
Pack your bags and get ready to go on vacation! Head to the airport and check in at the terminal. Put your luggage on the conveyor belt and watch it get loaded onto the passenger airplane. Go through security and then head out the revolving doors to the loading area. Climb the stairs and get buckled in, your trip is about to start! This creative play building toy includes 6 minifigures.
Inside the box we find eight numbered bags, two unnumbered bags containing large molded plane parts, two loose 16x16 plates, the large airplane wing in medium grey, a sticker sheet and four instruction booklets of varying sizes. Unfortunately there is no cardboard to keep the booklets and sticker sheet flat (though fortunately mine were not crumpled), but never fear, there is a brick separator!
Even in terms of play value it mostly seems to be a trade-off — 60104 loses the vending machine, cafe, baggage x-ray scanner, and a few seats on the plane but gains a baggage conveyor, a restroom, a refueling tank for the plane, an additional minifigure, and more seats in the waiting area. It's pretty nice to see the value of a LEGO air terminal remain fairly stable even though the price has not increased.
The middle section of the terminal (between the B and C gate areas) are dedicated to high-end fashion and accessories, among others you will find Gucci, Burberry and BOSS stores there. Other types of stores — many of which have two outlets, one east and one west of this section — include FineFood (domestic and international delicacies from fine cheese to foie gras and craft beer), WHSmith (books), Scandinavian Souvenirs (self-explanatory), and last but not least the five Heinemann Tax Free stores.
The last of the three aircraft is a modern biplane. This incorporates a number of rare orange elements including right and left 8 x 3 wedge plates which make up the wings and have only previously appeared in three sets, a 3 x 4 wedge brick only previously found in two sets, and a 3 x 6 round half plate with a 1 x 2 cutout which has only previous appeared in a single set in this colour and which forms the tailplanes. Similar to the two jets the tail fin is stickered rather than printed, as are the pair of 1 x 4 x 1 panels making up the sides of the cockpit. Unlike the jets, however, the instrument panel is stickered, which seems odd as there are existing printed 1 x 2 light bluish grey tiles which could have done an acceptable job. There are also a pair of stickers which represent the engine exhausts and which are applied to a couple of modified 2 x 4 x 1 1/3 bricks with curved top which sit just behind the propeller; applying these neatly to the curved surface takes a steady hand, and that’s also the case for the pair of checkerboard stickers which are stuck onto the propeller cowl. As if stickered exhausts weren’t enough, there are also a couple of light bluish grey exhaust pipes with Technic pin which emerge from the propeller cowl and run along either side of the fuselage. They’re entirely superfluous given the presence of the stickered exhausts but they still look cool regardless!
Play out real-life scenarios in LEGO DUPLO Town: a recognizable world with modern DUPLO figures. Help your little pilot get ready for take-off at the LEGO DUPLO Airport! It's easy for preschoolers to build the boarding gate, luggage slide and revolving air traffic control tower. Makes an ideal gift for preschool children. Contains 29 pieces. Airport measures over 8 (22cm) high, 5 (14cm) wide and 4 (11cm) deep. Plane measures over 3 (9cm) high, 7 (18cm) long and 6 (17cm) wide.
We analysed reviews from different sources and found out that this domain has mostly negative reviews. Having lots of bad reviews can be really harmful to reputation of Lego-airport. As a result the domain may suffer traffic decrease and search engines penalties. We would strongly recommend that the site’s administrators pay more attention to opinions & suggestions of the users to meet their high expectations.
There are 3 cardboard boxes with more Easter eggs. We get a few references to Marvel organisations such as A.I.M., who you may remember from Iron Man 3 as an R&D agency run by Aldrich Killian, Hammer, one of Stark Industries primary rivals which made an appearance in Iron Man 2, bankrolling Whiplash and finally a box with the Stark Industries logo on it.
This is a good set if you want an airport. The set includes a big plain and a terminal. The terminal has a control tower, check-in, luggage handler, fuel tank, ... I expanded my terminal and built it on a 32x32 baseplate and used the 2 grey 16x16 plates for the roof. The backside is not completely closed. Otherwise is the luggage belt is not accessible with my hand. I added 2 extra seats in the plane. Normally you have 6 seats in the plane, but I raised it to 8. I wanted more than 8 but that is almost not possible. The plane is brought with a big brick which includes the middle of the plane and the 2 wings and that one limits the possibilities. The toilet in the plane is still on the backside.

The remainder of the build is the control tower and terminal building. First there is a metal detector screener leading to the waiting/secure area of the airport, which seems taller than it needs to be for the minifigures. I think the same effect could have been made with half the height, except that would not allow for an impressive height for the overall tower. However it does seem to be similar to many modern airports with the high ceilings. This area also seems to be someplace to check luggage as evidenced by the rather nifty conveyor belt that comes in a full part. The moving parts of the set include a revolving door (a very tall one, for the first floor) that leads from the secure area of the airport out to the tarmac, and of course the conveyor belt.
×