Primary concept and development work takes place at the Billund headquarters, where the company employs approximately 120 designers. The company also has smaller design offices in the UK, Spain, Germany, and Japan which are tasked with developing products aimed specifically at these markets. The average development period for a new product is around twelve months, split into three stages. The first stage is to identify market trends and developments, including contact by the designers directly with the market; some are stationed in toy shops close to holidays, while others interview children. The second stage is the design and development of the product based upon the results of the first stage. As of September 2008 the design teams use 3D modelling software to generate CAD drawings from initial design sketches. The designs are then prototyped using an in-house stereolithography machine. These prototypes are presented to the entire project team for comment and for testing by parents and children during the "validation" process. Designs may then be altered in accordance with the results from the focus groups. Virtual models of completed Lego products are built concurrently with the writing of the user instructions. Completed CAD models are also used in the wider organisation, for marketing and packaging.
The railway station, 1 Københavns Lufthavn, Kastrup Station (sometimes called CPH Airport Station and wrongly Kastrup Station), is located in Terminal 3. The station has frequent connections to Copenhagen and Malmö, as well as InterCity trains for the rest of Denmark and a few daily SJ 2000 express trains for Stockholm. The frequent Øresund trains between Copenhagen and Malmö continue in Denmark to Elsinore and in Sweden to a number of destinations in Scania and other parts of Götaland. The travel time to Copenhagen Central Station is 12 minutes, and 20 minutes to Malmö Central Station.
The final two minifigures are the Biplane Pilot and the intrepid Wing Walker. Both of these minifigures share the same white torso which is printed with a flight suit design overlaid with dark red and bright light orange flames plus a logo over the left breast. The torso design is superb and it can at present only be found in this set. Both minifigures are provided with a reddish brown aviator cap and dark bluish grey goggles, and the pilot (below left) also gets an alternative to this headgear in the form of medium dark flesh mid-length hair which has only ever appeared in five sets in this colour.
Billund Airport had its beginning in 1961 when the son of the founder of the Lego Group, Godtfred Kirk Christiansen, established a private 800-meter long runway and hangar north of his factory in Billund. With Christiansen as a key driver, more of the neighbouring municipalities were included in the group of owners, and it was planned that the airport should be expanded to a regular public airport.
Correct me if I'm wrong, but is the hangar only large enough to house the biplane? A bit of a cock-up if that's the case. As good as the planes are, the hangar is a major failing. It looks like it's only about 30-40 pieces; just a bunch of big plates, some prefab cross-bracing and ... errrm ... air. Not so much a "hangar" as an aviation-equivalent of a car port!
My Lego Network is a social networking site that involves items, blueprints, ranks, badges which are earned for completing certain tasks, trading and trophies called masterpieces which allow users to progress to go to the next rank. The website has a built in inbox which allows users to send pre written messages to one another. The Lego Network includes automated non-player characters within called "Networkers", who are able to do things which normal users cannot do, sending custom messages, and selling masterpieces and blueprints. The site also has modules which are set up on the user's page that give the user items, or that display picture compositions. Before My Lego Network, there were Lego Club Pages, which essentially held the same purpose, although the design lacked complex interaction.
Copenhagen Airport is a compact airport with two terminals for check-in, but with a common post-security departure and transfer area, thus making transfers very smooth. The airport handles in excess of 25 million passengers a year, which puts it in the same league as Zurich and Vienna. It has also consistently topped the charts for Nordic airports, serving as a European and intercontinental hub for all of them due to its location.
Nice review, and it looks like a really nice set with a good mix of builds. The fact that I read the entire review without looking for the price speaks volumes for this in my opinion. The planes look good and I cannot see anyone from any age group who buys this not giving all three planes at least a quick test drive round the living room. One to add to my list.
LIC - LEGO Instruction Creator, developed by Jeremy Czajkowski, is a cross-platform, Python, OpenGL & Qt powered desktop application for creating and editing LEGO instruction books. LIC imports 3D models, organizes them into submodels, pages & steps, and exports the end result as images or PDF. A rich, WYSIWYG UI editor, which provides a fully interactive preview window along side a drag & drop-enabled navigation tree, to help organize and layout your book. Portions of LIC are based on work of Remi Gagne. LIC will be part of the AIOI - LDraw All-In-One-Installer.
I did prefer the previous 3182 airport set as it had a lot more components. But, I realise that it makes more business sense to offer a little less than raise the price of an already expensive product. However, 60104 is still a nice set and is often very well discounted in the UK so, I ordered a pallet load from Tesco during their 3-for-2 which made them a half-priced no-brainer ;-)
Parking capacity at Copenhagen Airport was greatly expanded in 2015 with the construction of a new lot as one of the first phases in an ambitious airport expansion plan scheduled to roll out in the coming decades. There are several lots: those near the terminals are very expensive, while the further-flung ones are cheaper (but have free shuttle bus service to the terminals).
Structurally, the plane model is sound and very well-built. A little too well-built in some areas you would say, but they are necessary measures like the awkward humps in the interior of the plane you will discover. Space is very wisely used in this model as they’ve managed to fit a proper looking cockpit for 2 pilots and even managed to squeeze in a sink, a mini-bar with the one drink, seats for 6 more passengers and even a tight little space of a washroom. That door hinge though, is a work of art.
The road distance is to Billund 3 kilometres (2 mi), to Vejle 28 kilometres (17 mi), to Kolding 41 kilometres (25 mi), to Esbjerg 61 kilometres (38 mi) and to Aarhus 98 kilometres (61 mi). There are airport buses to Horsens, Skanderborg and Aarhus. Eight additional bus services operate from the airport. There are six parking zones named after countries of the world, USA, Australia, Kenya, Spain, Egypt and Greenland. Three of the zones are connected by a shuttle bus, the other three being within walking distance.
If you’ve changed your mind about keeping your purchase, please return it in its original condition with proof of purchase and we’ll exchange or refund it. Unless faulty, this should be within 35 days of receiving your order. By original condition, we’d expect this to mean that you’ve kept packaging and labels, and that the item is undamaged and unused.
Almost all major European carriers have a connection to Copenhagen from their main hubs. As Denmark holds sizable immigrant communities from various European countries, even smaller carriers have frequent connections to the likes of Sarajevo or Belgrade. Copenhagen Airport has been seeing increased traffic from low-fare carriers since the launch of the dedicated CPH Go section of the airport (with common check-in and security with other airlines, but separate gates and waiting area). Airlines using CPH Go include EasyJet, Ryanair, Transavia, and WizzAir, although the latter only for selected destinations, with the majority of its flights to the Øresund area landing at Malmö Sturup Airport instead.
Thanks for the great review and comparison. I've thought about getting the Friends Airport for my daughter, as we both like the amount of detail inside the plane. Why would Lego think that boys don't care as much about detail? I love the wider body planes, but it's a shame they're not producing the runway plates, or including them in the airport sets, anymore. I agree with ZeeBricks that if they're not going to include everything an airport needs (although as expensive as price/piece these sets are getting it would cost a fortune) they should sell smaller sets that can be added together. Now that I'm feeling nostalgic for classic airport I might rebuild my 6392 and dust off my 6396 and set them up tonight, it's time for some serious swooshing :)
If you don’t own Black Panther Pursuit or any of the sets that included Captain America, I guess it would a plus getting the both of them in this set but Super Heroes collectors tend to be completionists, so I think that scenario will be particularly rare. I guess you could always sell your spares on the secondary market, but really, who wants to do that?
LEGO CITY has some recurring themes that can get old after a while and obviously are meant for younger LEGO fans. The Fire and Police themes within CITY quickly come to mind as it seems like they have a new run each year. The Airport theme is one of those that doesn't quite occur every year. The last airport set was released in 2010 and was set #3182. This year (2016) another airport was released. #60104, Airport Passenger Terminal, was released on 1 August 2016 in the US. It costs $99.99 in the US and contains 694 pieces or $0.144 per piece. I picked the set up from Amazon at 20% off or $80 ($0.115 per piece). Yay sales! Onto the review...
Lego also initiated a robotics line of toys called 'Mindstorms' in 1999, and has continued to expand and update this range ever since. The roots of the product originate from a programmable brick developed at the MIT Media Lab, and the name is taken from a paper by Seymour Papert, a computer scientist and educator who developed the educational theory of constructionism, and whose research was at times funded by the Lego Group.
Inside the box we find eight numbered bags, two unnumbered bags containing large molded plane parts, two loose 16x16 plates, the large airplane wing in medium grey, a sticker sheet and four instruction booklets of varying sizes. Unfortunately there is no cardboard to keep the booklets and sticker sheet flat (though fortunately mine were not crumpled), but never fear, there is a brick separator!
The remainder of the build is the control tower and terminal building. First there is a metal detector screener leading to the waiting/secure area of the airport, which seems taller than it needs to be for the minifigures. I think the same effect could have been made with half the height, except that would not allow for an impressive height for the overall tower. However it does seem to be similar to many modern airports with the high ceilings. This area also seems to be someplace to check luggage as evidenced by the rather nifty conveyor belt that comes in a full part. The moving parts of the set include a revolving door (a very tall one, for the first floor) that leads from the secure area of the airport out to the tarmac, and of course the conveyor belt.
Help the pilot and the airport worker get the packages ready for delivery! Use the hand truck to load the packages on the airport service car and drive them to the back of the plane for loading. Fit all the packages in and then make sure the back is closed before letting the pilot know he's good to go. Take off for some fun package delivery in LEGO® City!
Bag 6 starts the airport terminal. Like most CITY builds, they are meant for play so it's really only half a building. It includes one minifigure and the revolving door entrance. While the entrance is cool looking, it's about twice the height of a minifigure and there isn't enough physical space for one actually to fit through the door. I'm not a fan of the design.
This detailed model features a classic red, black and grey colour scheme, large driver's cab with detailed dashboard, wing mirrors, opening tool storage compartment, 4-cylinder engine with moving pistons, twin-axle steering, double rear axle and chunky tires. Activate the boom to position the water cannon and extinguish the flames! This Power Functions upgradable model can be rebuilt to create an awesome Fire Rescue Vehicle!
There are several robotics competitions which use the Lego robotics sets. The earliest is Botball, a national U.S. middle- and high-school competition stemming from the MIT 6.270 Lego robotics tournament. Other Lego robotics competitions include Junior FIRST LEGO League (Jr.FLL) for students ages 6–9 and FIRST Lego League (FLL) for students ages 9–16 (age 9–14 in the United States, Canada, and Mexico). Jr.FLL and FLL offer real-world engineering challenges to participants. FLL uses Lego-based robots to complete tasks. Jr.FLL participants build models out of Lego elements. In its 2010 season, there were 16,070 FLL teams in over 55 countries. In its 2010 season, there were 2,147 Jr.FLL teams with 12,882 total student participants in the United States and Canada. The international RoboCup Junior football competition involves extensive use of Lego Mindstorms equipment which is often pushed to its extreme limits.